Kit Includes

Booster & Mounting Brackets

• All weather on roof booster. Featuring a high gain amplifier (55 dB), Tru5 Band enhanced internal circuitry.
• The mounting bracket is made of #304 stainless steel, which is very strong and not easy to rust in any environment.

Roof Antenna & Bracket

• 3 dBi 698 MHz – 960 Mhz
• 5 dBi 1710 MHz – 2170 MHz
• Strong, shock absorbing spring, suitable for bumpy roads, rough trails, able to withstand moderate branch-strikes
• The bottom of the antenna is made of #304 stainless steel, which is very strong and not easy to rust in any environment

Interior Antennas, DC/AC Adaptor

1. Little size on indoor antennas, random change of placement
   1. Separate inside antennas for driving area and living area
   2. Have your cake and eat it to! No need to choose a single area where you want a boosted signal
2. We are equipped with DC cigarette lighter power supply and AC adapter at the same time, customers can choose according to their needs.

Cables, DC Power Feeder & Splitter

1. 20 Feet + 1 Foot + 2 – 15 Feet RG58 professional industry level quality, ultra low loss. It can be flexibly combined.
2. The high-performance distributor divides the signal into two channels. Feeds the DC power into the cable at the same time.

Outdoor Antenna and Booster Installation

Attach The Mounting Bracket To The Roof

Mount the bracket using adhesive

1. Using a detergent or alcohol, thoroughly clean the adhesive surface of the mounting bracket and the corresponding location on the roof of the RV.
2. Apply at least 100 ml of adhesive (purchased separately) to the bottom surface of the bracket.
3. Align the bottom of the bracket with the desired location on the roof of the RV.
4. Allow the adhesive to set and solidify for at least 24 hours. Do not install the antenna/booster or move the frame of the bracket during this time.

Assembling the Outside Antenna

1. Cable through the spring bracket
2. Connect cable to the antenna
3. Assemble spring bracket to antenna
4. Finished.

Attach Outside Antenna to Bracket

Fasten the antenna to the antenna bracket with accessories shown.

Install Booster and Outdoor Antenna

Install the booster and antenna as shown

1. Antenna with bracket assembling to booster.
2. Booster and antenna install to the roof mounting bracket.

Cable the System

Connect the outside antenna cable to the booster.

Make sure the connector is properly aligned with the port of the amplifier. Screw in the connection. Make sure the connection is secure.

Connect the Feeder & Splitter to the booster

1. Connect 20 foot cable to the booster.
2. Connect the same cable to the Power Feeder & Splitter.

Connect the two indoor antennas to the Power Feeder & Splitter

• Whether the cable is properly secured is very important for the entire system. In most cases, customers find that the booster did not work after working for a period of time because the cable was not securely installed.
• Carefully arrange the cable along the inside of the RV and ensure that there are not folds or kinks. Fix the cable at each corner.

Power on

Use the DC cigarette lighter power supply or AC adapter to turn on the system. If everything is normal, the LED indicator will turn green.